选择语言

Deutsch English (US) Français 日本語

See all Nokia sites

查看

Before taking a measurement

Make sure you follow these guidelines before taking a measurement:

  • The user and the Nokia Thermo have to remain in the same ambient temperature for ten minutes before taking a measurement.
  • The measurement has to be taken on dry skin. Sweaty skin could impact the results.
  • Wait at least fifteen minutes after a workout before taking your measurement.
  • If you’re taking the temperature of a baby, make sure you wait at least fifteen minutes after nursing him/her before taking a measurement.
  • Do not take a measurement on a premature baby.

Taking a measurement

To take a measurement, perform the following steps:

  1. Remove the protective cap.
  2. Press and release the button of your Nokia Thermo.
  3. Position the Nokia Thermo on your temple.
  4. The Nokia Thermo vibrates at the end of the measurement and the result comes up on the display.
  5. Slide your finger up or down on the touch sensitive area of the display to select the correct user.
  6. Press the button to confirm your choice.
    Your measurement is sent to the app after your Nokia Thermo turns off.

 

 Note: The Nokia Thermo can register approximately 30 measurements without syncing.

Understanding the fever status LED

The color of the LED indicates at a glance whether or not the person has a fever. This
is based on the temperature and the user’s age range. The severity of the fever is also clearly visible based on the color shown.

You’ll find below the fever status for each age range:

 

Viewing the history of my measurements

Once you’ve assigned a measurement from your Nokia Thermo, you can check
the history of measurements for the user. To do so, slide the touch sensitive area
of your Nokia Thermo from bottom to top to go back in time.

You can see the last five measurements taken in the past 72 hours.

Didn't find what you need? Here's how to get in touch.

联系我们