选择语言

Deutsch English (US) Français 日本語

See all Nokia sites

查看

This article will help you if you encounter any of the following issues:

- The screen of your Withings Pulse™ Ox doesn't turn on
- Your mobile device can't find your Withings Pulse™ Ox via Bluetooth
- Your Withings Pulse™ Ox is stuck on "Updating..."
- The setup process fails

Before proceeding with troubleshooting, please make sure that your mobile device is compatible with the Withings Pulse™ Ox. 

 


  

The screen of your Withings Pulse™ Ox doesn't turn on

If the screen of your Withings Pulse™ Ox doesn't turn on:

  1. Charge it for at least two hours.
    Try using a USB cable you know is working to make sure the issue doesn't come from the cable that comes with the device.
  2. After charging it, press the button for 15 seconds.
    At this point, it can take up to a minute for your Withings Pulse™ Ox to start.
    When it does, "hello" is displayed on the screen.

If you still encounter issues, reach out to Customer Service by clicking the Contact us button at the bottom of the page.

 

Your mobile device can't find your Withings Pulse™ Ox via Bluetooth

  1. Make sure your Withings Pulse™ Ox is close enough to your mobile device (10 m/30 ft.).
  2. Go to the Bluetooth settings of your mobile device and pair your Withings Pulse™ Ox from there.
    You can then go back to the app to install it.

If you still encounter issues, reach out to Customer Service by clicking the Contact us button at the bottom of the page.

 

Your Withings Pulse™ Ox is stuck on "Updating..."

  If your Withings Pulse™ Ox is stuck on "Updating..." during the installation process, perform the following steps:

  1. Stop the installation process by exiting the app.
  2. Perform a hard reset by pressing the button for 15 seconds.
  3. Start the installation process again.

 

The setup process fails

 If the setup process fails, perform the following steps:

  1. Make sure you have access to the internet on your mobile device.
  2. Make sure that you keep the app open during the installation process.
  3. Make sure that the screen of your mobile device stays on during the installation process.
  4. Keep your Withings Pulse™ Ox close to your mobile device during the installation process.

If you still encounter issues, reach out to Customer Service by clicking the Contact us button at the bottom of the page.

Didn't find what you need? Here's how to get in touch.

联系我们