choose language

Deutsch Français 日本語 简体中文

You can easily replace the wristband of your Nokia Steel HR™ thanks to the quick release spring bars with which it is attached. The 36-mm model requires wristbands that are 18-mm wide, while the 40-mm model requires wristbands that are 20-mm wide.

To change the wristband, perform the following steps:

  1. Turn your Nokia Steel HR over.
  2. Locate the knob of each spring bar.
  3. Pull the knob of the first spring bar to the left side and remove the wristband.

  4. Insert one side of the spring bar of the new wristband.
  5. Put the wristband in place while pulling the knob to the left side.
  6. Release the knob.
    The wristband is now properly attached to your Nokia Steel HR.
  7. Repeat the previous steps for the other side.

Didn't find what you need? Here's how to get in touch.

Contact us