choose language

Deutsch Français 日本語 简体中文

See all Nokia sites

Viewing

Your Nokia Steel HR™ can help you track your heart rate. By default, it takes a heart rate measurement every ten minutes, allowing you to see how your heart rate fluctuates during the day.

You also have the option of using the continuous heart rate mode to get your continuous heart rate, which is especially interesting during a workout session. In this case, a measurement is taken every second. Note that the continuous heart rate mode also enables a timer so that you know exactly how long you’ve been working out.

To make sure your heart rate can be effectively tracked by your Nokia Steel HR™, make sure the wristband of your Nokia Steel HR™ is tight enough while still remaining comfortable. It should also be worn about a centimeter (or half an inch) away from your wrist bone.

Capture_d__cran_2017-06-15___14.03.23.jpg

Note that you can position your Nokia Steel HR™ on the lower part of your wrist. However, we cannot guarantee the accuracy of the heart rate data, because the product is not aimed to be positioned on the lower part of your wrist.

 

Launching the continuous heart rate mode

You can easily launch the continuous heart rate mode before a workout session. To do so, perform the following steps:

  1. Press the button of your Nokia Steel HR™ for about a second until it vibrates.
  2. The continuous heart rate mode is on
  3. Press the button until it vibrates again when you want to stop the continuous heart rate mode.

Only the heart rate screen appears on the display of your Nokia Steel HR™ when the continuous heart rate mode is on.

Note: The continuous heart rate mode will be activated automatically after 2 minutes of running. It will stop automatically when the running session is over.

Click here to see how to launch the continuous heart rate mode.

Didn't find what you need? Here's how to get in touch.

Contact us